Sign In
 
Search
Print Get Connected  
Electromechanical Powered Systems
WP_6225_590x332
OverviewSingle DoorVestibule EntryDownloads

Electromechanical Automatic Operators
 
LCN’s electromechanical products are designed primarily for automatic opening applications that occasionally require manual opening. A control box provides all electrical functions. These self-contained units are suitable for use on single leaf doors or pair of doors. These products combine all the control and power elements into a single operator package, only some actuators are required to complete the system.
  • Surface mounted and overhead concealed mountings available.
  • Available in two standard anodized finishes – aluminum and dark bronze. Custom anodized finishes and custom paint is available.


Low Energy Electromechanical Power Operators

  • Complies with ANSI 156.19
  • Opening time from full close to backcheck is no faster than 3 seconds
  • Less than 15lbs of force to open door manually
Standards, Listings & Approvals
  • UL listed for self-closing doors without hold open. UL 325.
  • Tested and certified under ANSI.
  • Low Energy Electromechanical Operators ANSI 156.19
  • High Energy Electromechanical Operators ANSI 156.10
  • ADA Compliant. Applicable to Low Energy Electromechanical Operators only.
  • Wiring is compliant with both UL 325 and the NEC. Separation of high and low voltage.
  • Consult the factory for other listings.
Warranty
2 year limited warranty. See General Section for complete details
 
Maintenance
 
Low Energy Electromechanical Power Operators
  • Operators mounted according to the LCN Installation instructions require no periodic maintenance or adjustments.
  • Monthly, quarterly and annual visual inspections are recommended.
  • No service contracts.
Below are examples of typical Electromechanical LCN systems. Please consult your local SSC representative of LCN for assistance with specific installations and material requirements.
 
Single Door System (Low Energy)
  • An Interior Door
  • No guide rails or safety devices
  • Free Swinging (or Dogged) Door
How It Works
Wireless RF actuators with receiver, powered by the transformer allows for easy installation. For automatic door operation, touching either actuator signals the receiver and power operator to open the door to 90 degrees. The door is held there until the system times out. Door closes via spring return. Door opening speed, closing speed and hold open time is adjustable on the control box. If not actuated, the power operator functions as a manual door.
Below are examples of typical Electromechanical LCN systems. Please consult your local SSC representative of LCN for assistance with specific installations and material requirements.
 
Vestibule Entry System (Low Energy)
  • Exterior & Vestibule doors
  • Sequential Operation
  • No guide rails or safety devices
  • Controlled Access, Free Egress
How It Works
This installation provides both accessibility and security for building occupants. It allows for the integration of multiple automatic operators, a card reader and electric strike. A sequencer allows sequential operation of the two automatic operators. Vestibule actuators allow single door ingress/egress from the vestibule as needed. If not actuated the power operator functions as a manual door.