Programming ModeAllows tailoring the following functions to meet specific site conditions
Push ‘N GoAllows pedestrians to walk up to the door and push it open as if it were a manual door. After the door is manually opened approximately 5 degrees, the Push ‘N Go feature takes over and continues to open the door – slowly and automatically to the full open position. With Push ‘N Go, the door will stay fully open from one to 30 seconds, depending on the time delay chosen.
Auto ReverseA safety feature that reverses the direction of the door when it comes into contact with an object during either opening or closing.
Safety Slow/Stops FunctionOnce the door starts opening, any person or object entering the swing area will cause the door to go into a safety slow speed. This function can be set to allow for a short stop once a person or object is sensed.
Power BoostAdds an additional latching force to ensure secure latching in severe wind or stack conditions. Power Boost is also ideal for overcoming slowing obstacles such as electric strikes. Provides approximately 25 lbs. of additional closing force.
MicroprocessorControl unit allows for quiet efficiency in operation. Combined with the all electromechanical unit, it eliminates unnecessary wear and prolongs the life of the unit.
Electric Lock DelayCauses a 1 second delay between activate signal and door opening to allow time for most electric locks to disengage before operator opens door.