Sign In
 
Search
Print Get Connected  
H-Series
WP_6164_590x332
OverviewOptionsDownloads

Select Sweets ProductTAG to Annotate Content

The H16 and H14 Series Flush Doors have been specifically designed and tested to meet the performance-based provisions of the Florida Building Code (FBC) and the South Florida Building Code (SFBC) while providing architects, designers and building owners with the broadest choices for their specific applications.
 
Specifiable options include glass lights, transom and sidelights, louvers, exit hardware, cylindrical or mortise single point locks, as well as a variety of door core and edge construction options.
 
All H-Series doors have been tested to protocols TAS 201, 202 and 203, indicating their ability to withstand the missile impact, structural load and cyclic wind pressure tests prescribed by the Codes.
 
Features and Benefits
  • A-60 Galvannealed steel face sheets
  • Core Systems that enhance structural integrity:
    • Honeycomb (Standard) – 1” (25mm) cell kraft honeycomb configuration that increases structural integrity while reducing overall weight
    • Polystyrene (optional) – enhanced thermal performance
    • Polyurethane (optional) – extreme thermal performance
    • Mineral Board (optional) – rigid, temperature rise control
    • Steel Stiffened (optional) – welded hat section stiffeners
  • Full Height, Epoxy Filled Mechanical Interlock Edges provide structural support and stability the full height of the door edges
  • Full Height Lock Side Reinforcement Channel ensures structural stability and locking hardware functionality under extreme pressure conditions
  • Universal Hinge Preparations (patented) allow for easy field conversion from standard weight .134” (3.3mm) hinges to heavy weight .180” (4.7mm) hinges
  • 14 Gage [0.067” (1.7mm)] Top and Bottom Channels provide stability and protection for the top and bottom edges from abuse
  • 3/8˝ undercut is standard on all H-Series doors, to accommodate hurricane code requirements
  • Beveled Hinge and Lock Edges allow for tighter installation tolerances, ensure easier operation and eliminate binding and sticking
  • Recessed Dezigner™ Glass Trim provides a clean, neat and flush finish with the door surface
  • Screwed-in top caps provide additional weather protection to exclude water and debris from exterior outswing doors
  • Factory Applied Baked-On Rust Inhibiting Primer paint in accordance with ANSI A250.10-1998 (R2004)

Specifications

  • Door construction meets the requirements of ANSI A250.8-2003 (SDI 100)
  • Hardware preparations and reinforcements are in accordance with ANSI A250.6-2003. Locations are in accordance with ANSI/DHI A115.
  • Florida Building Code test protocols for high velocity hurricane zones: TAS 201, TAS 202 & TAS 203
  • Meets fire rating requirements
Finish Paint
  • Rookwood Brown
  • Downing Earth
  • Downing Stone
  • Downing Sand
  • Aurora Brown
  • Weathered Shingle
  • Chelsea Gray
  • Black Bean
  • Spalding Gray
  • Blonde
  • Mannered Gold
  • Burgundy
  • Luxurious Red
  • Sierra Redwood
  • Homberg Gray
  • Cascades
  • Raisin
  • Pool House
Standard H-Series Core
  • 1” (25mm) cell, 99 pound Kraft honeycomb
  • Honeycomb surfaces sanded for maximum adhesion
  • Impregnated with phenolic resin (resists mildew and vermin)
  • Laminated to both face sheets with contact adhesive
  • Assembled door is run through high pressure pinch rollers, achieving ultimate bond

Optional Polystyrene Core

  • 1 pound (453.6g) per cubic ft density slab
  • Laminated to both face sheets with contact adhesive
  • Labeled applications

Optional Polyurethane Core

  • 1.8 pound (816.5g) per cubic ft density slab
  • Laminated to both face sheets with contact adhesive
  • Non-Labeled applications

Optional Mineral Fiber Board Core

  • 250°F (121°C) Temperature Rise rating

Optional Steel Stiffened Core

  • Stiffeners welded to inside of face sheets
    • Located 6˝ (152.4mm) on center
    • Welded to face sheet 4˝ (101.6mm) on center
  • Stiffeners welded to each other at the top and bottom
  • Areas between stiffeners filled with 1 pound (453.6g) per cubic ft density fiberglass batt insulation

Standard Premium Edge Construction

  • Beveled hinge & lock edges
  • Full height mechanical interlock with adhesive
  • Visible edge seam standard
  • Seamless edge optional

Standard Rigid 14 gage End Channel Construction

  • 14 gage inverted galvannealed top & bottom channels
  • Projection welded to both face sheets
  • Optional 24 gage galvannealed top caps

Door Application and Usage

Series
Steel Thickness Opening Usage Frequency
H16 16 Ga (1.3mm) Exterior-Galvannealled Steel Extra Heavy Duty
H14 14 Ga (1.7mm) Exterior-Galvannealled Steel Maximum Duty

Standard Hardware Preparations

  • Universal Mortise Hinge Prep
  • 61L Lock Preparation
  • Inactive Leaf: ASA Strike Preparation
  • Optional 14 Gage Closer Reinforcement

Standard: mortised and reinforced for

  • Patented Universal hinge preparations allow for easy field conversion from standard 4 1/2” (114mm) x .134” (3.3mm) standard weight hinges to 4 1/2” (114mm) x .180” (4.7mm) heavy weight hinges. Optional hinge preparation for 5” (127mm) x .146” (3.7mm) standard weight hinges or for 5” (127mm) x .190” (4.8mm) heavy weight hinges is also available
  • The cylindrical 161, 61L and mortise 86 lock preps are the most commonly used active leaf preparations. The 4 7/8˝ (124mm) strike prep is the most commonly used inactive leaf preparation.
  • Optional reinforcements for surface closers are available

Door Sizes and ANSI A250.8 Conversions

Series ANSI A250.8 - SDI 100 Edge Construction Options Maximum Sizes Recommended Gage of Frame
Level Model Description Single Pair
Level 3 - Extra Heavy Duty Commercial & Institutional
H16 3 1 Full Flush Visible 4'0" x 8'0"
1219mm x 2438mm
8'0" x 8'0"
2438mm x 2438mm
14 Gage [0.067" (1.7mm)]
16 Gage [0.053" (1.3mm)]
HF16 3 2 Seamless Epoxy Filled
HW16 3 2 Seamless Welded
Level 4 - Maximum Duty Commercial & Institutional
H14 4 1 Full Flush Visible 4'0" x 8'0"
1219mm x 2438mm
8'0" x 8'0"
2438mm x 2438mm
14 Gage [0.067" (1.7mm)]
12 Gage [0.093" (2.3mm)]
HF14 4 2 Seamless Epoxy Filled
HW14 4 2 Seamless Welded

Door Edge Construction

Standard Visible Seamless
H Series Visible Seam Features

  • Full height mechanical interlock
  • Interlock filled with epoxy adhesive
  • Visible edge seam

Optional Seamless Edges
HF Series Seam Filled Features

  • Full height mechanical interlock
  • Interlock filled with epoxy adhesive
  • Seam epoxy filled and finished
  • No visible edge seam

HW Series Seam Welded Features

  • Full height mechanical interlock
  • Edge seam welded 1” (25mm) long, 2” on center
  • No visible edge seam