Sign In
 
Search
Print Get Connected  
1000 Series
WP_6177_590x332
OverviewOptionsDownloads

Select Sweets ProductTAG to Annotate Content

Applications

  • For aluminum, hollow metal, or wood swinging doors and frames
  • Can be used with hinge or pivot mounted door
  • Mounts on a 1 3/4' transom without adapter plates
  • Adapter plates and other installation accessories availabvle for unusual conditions
Features Common to 1000 Series
  • 1000 series closers mount three ways. Closers with regular or hold-ope arm mount hinge side or top jamb. Parallel arm, designated with a "P", closers include - 62PA SHOE required for parallel arm mount. 1460T mounts hinge side, top jamb (pull side) and stop face.
  • Non-handed for right and left swinging doors
  • Closers to meet ADA reduced opeing for requirements
  • Adjustable hydraulic backcheck cushions opeing swing prior to 90 degrees
  • Separate regulation of general closing speed and latching speed
  • Joints in arm and shoe adapt to uneven trim
  • Reversible shoe to boost latching power on double lever arms
Design Assistance
LCN has been providing reliable solutions to unique door control problems for over 75 years. Design and specification assistance are only a phone call away. See Next Steps for our Customer Care phone number.  
 
Warranty
  • 30 year limited warranty (1460 Series)
  • 20 year limited warranty (1260 Series)
  • Limited warranty applies to LCN products purchased on or after March 3, 2014.
Specifications
Refer to catalog for suggested architectural specifications.
 
Materials
  • High strength cast iron cylinder
  • Forged steel main arm for all EDA, Cush, 1460HD and 1460T Arms
  • One piece forged steel piston
  • Heat treated pinion
  • All weather fluid eliminates seasonal adjustments
  • High efficiency, full complement, low friction bearings
  • Tamper resistant regulating screws
  • Full rack and pinion hydraulic action
  • Quiet, low friction track and roller combination for all single lever arm closers
Listings and Approvals
UL listed for self-closing doors without hold-open under "Swinging Door Closers" (GVEV) file R 1943.
Tested and certified under ANSI Standard A156.4 grade one. Consult factory for details.
Consult factory for other listings such as; cUL, California State Fire Marshal, Bureau of Standards and Appeals.
 
Positive Pressure
LCN closers have been certified for three hours by UL to be in compliance with UBC 7-2 (1997) and UL 10 C. Contact LCN for specific details on door closer  fire ratings.
 
Fasteners
1260, 1460, 1460T series closers are shipped with: A stardard SELF-REAMING and TAPPING SCREW (SRT) pack that contains Philips heat SRT screws to install the closer. Standard LCN thru bolts (TB) can be installed on 1 3/4" (44mm) thick doors with 1/4-20 machine screws. Optional thru bolt (TB) sizes are available for 1 5/8" (41mm) or 1 3/8" (35mm) door thickness, but this must be specified when ordering.
Note 1: for Through Bolts, specify door thickness if other than 1 3/4" (44mm).
Note 2: Phillips head, metric machine screws are available, please specify.
Note 3: LCN recommends the use of wood screws in wood door applications.
 
Maintenance
Closers mounted according to LCN installation instructions require no periodic maintenance or adjustments.
Finishes
  • Available in six standard or a wide selection of optional custom powder coat finishes to blend with door and frame
  • LCN's powder coat finish surpasses 100 hours of salt spray which is over four times the ANSI standard for corrosion resistance
  • For installations were a higher level of corrosion resistance is required, LCN offers and optional special rust inhibiting (SRI) pre-treatment. Closers that combine the exclusive LCN powder coat finish and the SRI pre-treatment exceed the ANSI standard for corrosion resistance even further.
  • Plated finishes are available as an option to accent door and frame for the 1460 Series closers.