Sign In
 
Search
Print Get Connected  
2090 Series Cross Bar Exit Device
WP_5860_590x332
OverviewOptionsAccessoriesDownloads

Select Sweets ProductTAG to Annotate Content

Classic looks in a rim exit device
The 2090 provides balanced appearance, dependable performance and economical pricing, making it a popular choice where rim exit devices are required.

Specifications

  • Hand: Specify RHR or LHR, not reversible
  • Functions: See trim selection chart
  • Finishes: P28, P13, P35, US3, US26D
  • Strikes: SD36 standard
  • Latchbolt: 1/2" throw hardened steel
  • Dogging Feature: Hex dogging standard
  • Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable)
  • Sizes: Field adjustable width, 41" crossbar standard, fits 3' 8" door width, extra length crossbars available
  • Doors: 1 3/4" thick metal or wood doors, specify if wood door
  • Projections: 4 3/8" extended, 2 1/2" depressed
  • Stile: 1 3/4" minimum
  • Fasteners: All mounting screws are concealed
  • ANSI: Certified ANSI A156.3 Grade 1 standards
  • Mullions: Removable mullions are available for pairs of doors
Model
Trim Package Type Function
2090  No outside trim 4 1
2091  Pull only (9970) 4 2
2092 Cylinder only 4 40606
2093  Pull and cylinder 4 38020
If cylinder is used, set pinion cam on back of active housing for hold-back (HB) or night latch (NL) operation.

Hold-back (HB)
Turning key one complete rotation retracts latchbolt. If key is removed in this position, latchbolt stays retracted. Returning key to original position before removing allows latchbolt to extend.

To set for hold-back: Turn pinion cam until latchbolt starts to retract, then turn pinion cam the other way as far as it will go. Leave pinion cam in this position.

Night latch (NL)
Turning key as far as it will go retracts latchbolt. Key must be returned to original position to be removed, leaving the door locked.

To set for night latch: Turn pinion cam until latchbolt starts to retract. Leave pinion cam in this position.

Mullions
RM 70/170 Removable Mullion
RM 70 for use with 2090 Series and RM 170 for use with 1790 Series. Each comes complete with adjustable mortised strikes and security clips. Compatible with doors 7' to 10' and for use with stiles as narrow as 1 3/4". Made of aluminum, they are available in anodized aluminum or bronze finishes. Mullion is 3 1/2" deep, 1" wide on door side, and 1 5/8" at the widest point.

RM 150 Removable Mullion
For use with 1590 series only. Comes complete with adjustable mortised strikes and security clips. Compatible with doors 7' to 10' and for use on doors with stiles as narrrow as 1 3/4". Made of aluminum, they are available in anodized aluminum or bronze finishes. Mullion is 3 1/2" deep, 1 5/8" wide on door side, and 2 1/2" at the widest point.
 
Mullion Strikes
STK70
Adjustable mortise
strikes (pair).
2 3/8" tall
1 7/16" wide
1" thick
STK150
Adjustable mortise
strikes (pair).
2 3/4" tall
1 9/16" wide
1/2" thick, each side
STK170
Adjustable mortise
strikes (pair).
2 7/8" tall
1 3/4" wide
1" thick


Strikes
Concealed Vertical Rod
PB48
Top strike for 1990/1490/1690/2390 devices.
Packed with three 0.050" thick shims.
1 1/16" square
7/16" projection

Rim
STK45
Strike for inactive leaf,
pair of doors with
1590/1790/2090
devices.
3 1/4" tall
1 5/16" wide
1/4" thick
SD36
Strike for all stops,
2090 device.
1 3/4" tall
1 3/4" wide
1/2" thick
SD35
Strike for 1/8" x 1/2"
blade stop, 2090 device.
1 3/4" tall
1 3/4" wide
1/2" thick
TD35
Strike for single doors,
1590 or 1790 device.
Includes 1/8" shim.
3" tall
2" wide
1/2" thick


Pull
9970
Can be used with all devices.
9 1/4" center to center
2 7/8" projection
1 3/4" clearance
 
Power Supply
Series PS873
The series PS873 power supply is designed to operate a wide variety of electrical products. EL panics require PS873-2 power supply at a minimum. The regulated output power is field selectable for either 24VDC @ 2 ampere or 12VDC @ 4 ampere. Standard input 120 VAC @ 1.0 ampere or 240VAC @ 0.5 ampere available.

Enclosure is 10" high x 12 1/2" wide x 5" deep (254mm x 323mm x 127mm), gray with a hinged cover and constructed of heavy 19 gauge steel. Five 1/2" x 3/4" (13mm x 19mm) knockout holes are provided for  conduit connection. Terminal block will accept up to 12 gauge wire.

Factory or field-installed circuit card
For use with Falcon EL devices. Power supply may have key lock or battery back-up option added, along with up to 2 option boards in a single power supply. Maximum number of ELs with one power supply is 6.
Options: K - Key lock, BB - Battery back-up

Option Boards (must have at least option board):
  • 2 - Two-zone controller, will operate 1 or 2 electric devices
  • 4TD - Operates up to 4 electric devices with time delay
  • AO - Operates a single or pair of doors, coordinating with an auto-operator
Door Thickness
All devices and components supplied for 1 3/4" doors standard. Specify door thickness if other than 1 3/4".
 
Number 
BHMA/ANSI Function
1 Exit only, no trim.
2 Entrance by trim when actuating bar is locked down.
3 Entrance by trim when latchbolt is retracted by key; key removable only when locked.
4 Entrance by trim when latchbolt is retracted by key or set in a retracted position by key.
8 Entrance by knob or lever; key locks or unlocks knob or lever.
9 Entrance by knob or lever only when released by keys; key removable only when locked.

U.S. Standard 
BHMA  Description
US28 628 Anodized Aluminum – Clear
DC13 710 Anodized Aluminium – Dark Bronze
DC35 711 Anodized Aluminum – Black
P28 689 Painted Aluminum – Silver
P13 695 Painted Aluminum – Dark Bronze
P35 622 Painted Aluminum – Black
US3 666 Bright Brass
US4 667 Satin Brass
US9 705 Bright Bronze
US10 668 Satin Bronze
US10B 703 Oxidized Satin Bronze
US14 669 Bright Nickel
US15 670 Satin Nickel
US26 672 Bright Chrome
US26D 702 Satin Chrome