Sign In
 
Search
Print Get Connected  
94-95 Series INPACT Recessed Exit Device
WP_5844_590x332
OverviewLever StylesAccessoriesDownloads

Select Sweets ProductTAG to Annotate Content

INPACT is fully integrated within a door and combines a clean, tasteful appearance with Von Duprin’s unrivaled standards of durability and performance. The design is compatible with hollow metal doors, including doors manufactured by Steelcraft®, part of the Allegion product line.
 
Features and Benefits
Design
The streamlined, extruded aluminum pushpad is uniquely designed to exhibit grace under pressure. Built to absorb shock, it takes the wear and tear of even the most demanding high-traffic areas. The sloped, die-cast metal endcaps provide added support, protecting the device and the door against the heaviest impact. The nonhanded configuration simplifies installation and gives superior flexibility in the field.
 
Construction
Compression springs are used throughout, and all internal components are coated with zinc dichromate to prevent corrosion. Latchbolts have a self-lubricating coating to reduce friction and wear. Concealed studs and through-bolts, from the inside, fasten the heavy-duty outside trim. Factory steel door prep makes installation simple and fast. Not available on wood doors.

Durability and Reliable Operation
Devices are tested in accordance to ANSI/BHMA A156.3 Grade 1 by a BHMA certified testing laboratory. INPACT has exceeded one million cycles.
 
Specifications 94/95 INPACT Concealed Vertical Rod Devices
  • Models: 9447 and 9547
  • Fire-Rated Models: 9447-F and 9547-F
  • Device Handing: Non-handed
  • Functions: See Trim Selection Chart on the Styles tab
  • Finishes: See Finishes Chart on the Styles tab
  • Styles: Smooth 94 Series and Grooved 95 Series
  • Pushpad: Extruded anodized aluminum
  • Endcaps: Die-cast aluminum, sloped design
  • Strikes: Standard 338 and 385A provided.
  • Latchbolt: 5/8" (16mm) throw. Top and bottom latching are standard. (Optional LBR is available, with no need for floor strike.)
  • Deadlocking Latchbolt: Standard
  • Dogging Feature: Hex key dogging
  • Door Sizes: 2'10" (864mm) to 4'0" (1219mm) width; 10'0" (3048mm) maximum height; 1 3/4" (44mm) thickness
  • Device Height: 4 1/2" (114mm)
  • Device Length: 30" (762mm)
  • Device Center Line to Finished Floor: 39 5/8" (1006mm)
  • Projection: 1 5/8" (41mm) neutral; 1 1/4" (32mm) depressed
  • Fasteners: Included for surface mounting to recessed door prep and through bolting to trim.
  • ANSI Grade: Certified to ANSI/BHMA A156.3 Grade 1. Tested at one million cycles.
  • Concealed Vertical Rods: Two-piece adjustable rods, door 6'8" (2032mm) to 8'4" (2540mm). Can be adjusted by removing the latchside endcap.
  • Optional Extension Rod: Adjustable for doors 8'4" (2540mm) to 10'0" (3048mm).
Specifications 94/95 INPACT Mortise Lock Devices
  • Models: 9475 and 9575
  • Fire-Rated Models: 9475-F and 9575-F
  • Device Handing: Non-handed
  • Functions: See Trim Selection Chart on the Styles tab
  • Finishes: See Finishes Chart on the Styles tab
  • Styles: Smooth 94 Series and Grooved 95 Series
  • Pushpad: Extruded anodized aluminum
  • Endcaps: Die-cast aluminum, sloped design
  • Strike: Standard 575
  • Latchbolt: 3/4" anti-friction, field reversible
  • Deadlocking Latchbolt: Standard
  • Mortise Lock Center Line to Finished Floor: 48 1/8" (1222mm)
  • Dogging Feature: Hex key dogging
  • Door Sizes: 2'10" (864mm) to 4'0" (1219mm) width; 10'0" (3048mm) maximum height; 1 3/4" (44mm) thickness
  • Device Height: 4 1/2" (114mm)
  • Device Length: 30" (762mm)
  • Device Center Line to Finished Floor: 39 5/8" (1006mm)
  • Projection: 1 5/8" (41mm) neutral; 1 1/4" (32mm) depressed
  • Fasteners: Included for surface mounting to recessed door prep and through bolting to trim.
  • ANSI Grade: Certified to ANSI/BHMA A156.3 Grade 1. Tested at one million cycles.

Click on images to get product dimensions, finish swatches, and suiting information.

 

Standard Levers

 

Decorative Levers

INPACT Trim Options

Electric Latch Retraction
The EL feature allows for the remote latch retraction of exit devices. A control station operator can flip a switch to retract the latchbolt and immediately change an exit door to push/pull operation. A powerful, continuous-duty solenoid retracts the latchbolt either for momentary unlocking or for extended periods of time. The EL feature is an alternative to manual dogging. EL devices are also useful with automatic door operators, and may be applied to fire-rated devices when under the control of an automatic fire alarm system. UL approved for Class II circuit applications. This feature does not include the power transfer from door to frame, nor the power supply or control operator.

Solenoid Specifications: Continuous-Duty 24 VDC. Current Inrush 16 Amps. Current Holding (450 milliamps) 0.5 Amps. To Order: Specify prefix EL.

Latchbolt Monitoring
The latchbolt monitor or (LX) feature gives an electronic signal when someone enters an opening from the trim side of the door. The device can then be connected to a security console or may be used as a single door alarm when used with a horn and power supply. The (LX) switch is located inside the device’s pushpad on a concealed vertical rod device. For a mortise device, the switch is located inside the mortise lock. Electrical Ratings: 0.5 Amp., 24 VDC. To Order: Specify prefix LX.

INPACT Accessories
Cylinders are not furnished with device or trim and must be specified when ordering. Mortise lock exit devices and the LP373L, 376T and LP230L use mortise-type cylinders.

Less Bottom Rod
The Less Bottom Rod (LBR) option is available for concealed vertical rod devices. In lieu of a bottom rod and latch, a springloaded auxiliary bolt is installed in the lower door edge. When exposed to heat, during a fire, the auxiliary latch releases, keeping the doors in alignment and closed. UL listed for 3 hours on double egress doors and for 90 minutes on doors swinging in the same direction. The LBR option is not recommended for exterior door openings or where security is critical.

Request to Exit
The pushpad monitor or (RX) feature gives an electronic signal when someone exits an opening from the device side of the door. The device can then be connected to a security console or may be used as a single door alarm when used with a horn and power supply. The (RX) feature is available only on mortise devices using the (NL) function. The (RX) switch is located inside the mortise device’s pushpad.

Electrical Ratings: 0.5 Amp., 24 VDC. To Order: Specify prefix RX.

UL Listed - Fire Exit Hardware Label/Opening Size

 
  Double Doors
Exit Device Single Door Same Direction Double Egress
9475-F
9575-F
3 Hour
4' x 10'
---- ----
9447-F
9547-F
---- 90 Minute
8' x 10'
3 Hour
8' x 10'
9447LBR-F
9547LBR-F
---- 90 Minute
8' x 10'
3 Hour
8' x 10'

Antimicrobial Coatings for Exit Hardware
Hospitals, schools and food service facilities experience high traffic every day, even in areas that aren’t open to the public. Von Duprin can help you combat bacteria on panic and exit hardware with an antimicrobial coating that provides lasting protection.

The vast majority of bacteria are rendered harmless by the human immune system, but a few are responsible for infectious disease. The antimicrobial coating on Von Duprin exit devices works to protect the hardware’s surface by inhibiting the growth of bacteria, mold and mildew.

The coating is made using ionic silver (AG+), a single atom that is missing one orbital electron that interacts with the bonding sites on the microbe surface. The result is that silver ions surround bacterial cells – blockading food and respiration supplies, hindering the bacteria from reproducing.