Sign In
 
Search
Print Get Connected  
X-Series Locks
WP_5820_590x322
OverviewStylesDownloadsKey SystemsOptions/Accessories

Select Sweets ProductTAG to Annotate Content

When you need a tough, reliable lock that can also withstand the corrosive conditions of a marine environment you need a Falcon X Series lock with our XC construction. The XC option provides a stainless steel and non-ferrous constructed chassis that, when paired with stainless steel trim, provides a Grade 1 lock that is resistant to corrosion when exposed to moisture and salt. This full knob line features an interchangeable core that can be removed for quick, easy re-keying. Our interchangeable cores are compatible with SFIC products from other manufacturers. And they’re backed by one of the best names in the business.

Features and Benefits
Key-in-knob cylindrical locksets shall be Falcon Lock X Series or equal and meet the following requirements:
• All locksets and latchsets shall meet Grade 1 requirements of ANSI/BHMA 156.2, Series 4000.
• Locksets and latchsets shall be UL Listed for use on 3 hour A Label doors.
• Locksets and latchsets shall have 3-1/4” diameter round roses.
• Knobs shall be .050” minimum thickness.
• There shall be no exposed screws on trim.
• Locksets and latchsets shall have threaded collars for easy door thickness adjustment on both sides of lock.
• Cylinders shall have a minimum of 6 active pin chambers and shall be furnished with 2 nickel silver keys.
• Locksets shall have 6-pin (or 7-pin) interchangeable cores.
Acceptable manufacturer: FALCON LOCK

Specifications
Door Thickness: 1-3/8” to 1-7/8” doors. Locks for thicker doors also available. Consult factory.
Backset: 2-3/4” standard. 2-3/8” also available.
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. XC Series available with all internal parts of stainless steel or other nonferrous materials.
Attachment: Locks secured to door by threaded collars. Inner collar tightened by special wrench furnished with each lock. Outer rose contains locking plate to prevent unauthorized removal.
Handing: Specify hand of door when ordering. Field reversible.
Cylinders: Drilled with 6-pin chambers, pinned in 5. Pinning in 6 chambers available when specified, at no cost. 7-pin cylinders available in Hana design. Cylinder assemblies removable to rekey or change hand of lock. Also available with 6 or 7-pin interchangeable core cylinders–Elite and Troy designs. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.
Keyways: “G” keyway standard on standard cylinders. “A” keyway standard on I/C core cylinders. Also available with other keyways and some competitor keyways. See pages 9-10.
Trim: Roses are heavy wrought brass, bronze or stainless steel, installed over wrought steel reinforcing plates. Knobs are brass, bronze or stainless steel secured by a steel knob retainer which cannot be depressed when lock has been locked. See individual designs on pages 5-6 for details.
Latches: 9/16” bolt projection, UL Listed for A-label applications. Standard latch faceplates 2-1/4” x 1-1/8” with square corners to accommodate beveled or flat front doors. 3/4” projection, UL Listed latch with 2-3/4” backset also available.
Strikes: 4-7/8” x 1-1/4” ANSI strike with curved lip to meet ANSI A115.2 standard door frame preparation standard. Consult Options and Accessories section for other strike sizes and configurations.
Screws: Furnished with combination wood/machine screws for use in wood or metal doors and frames.
Certifications
ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.
UL: 3 hour A label.
Knobs and Roses
Knobs and roses are wrought brass, bronze or stainless steel (Troy) installed over steel or nonferrous reinforcing plates. Knobs are secured by a spring-loaded retainer. Retainer cannot be depressed when locks have been locked.
  • Troy-Gala (TG)
  • Elite-Gala (EG)
  • Hana-Gala (HG)
  • Hana-York (HY)
  • Troy-York (TY)
  • Elite-York (EY)

Abrasive Coated Knobs
All trim is available with abrasive coating around the circumference of the knob to identify entrances to hazardous areas to the handicapped. To order, add: “with abrasive coated outer knob” in detail section of order.

Knurled Knobs
All heavy duty knobs are available knurled to identify entrances to hazardous areas for the handicapped. To order add: “with knurled knob” (outer or inner) in detail section of order.

Functions

FALCON
ANSI
Description
X101
F75-1
Passage/Closet
Latchset Latch bolt by knobs at all times.
X301
F76-1
Privacy Lock
Latch bolt by knobs. Outside knob locked by push button in inside knob. Rotating inside knob or closing door releases push button. Emergency release in outside knob. Emergency Release Tool 001423-001-30.
X411
F87-1
Asylum Lock
Deadlocking latch bolt by key from either side. Both knobs rigid.
X501
F82-1
Entry Lock
Push button locking. Button on inside locks outside knob until unlocked by key or by rotating inside knob.
X511
F109-1
Entry/Office Lock
Turn/push button locking. Pushing and turning button locks outside knob requiring use of key until button is manually unlocked. Push button locking. Pushing button locks outside knob until 1unlocked by key or by turning inside knob.
X521
F81-1
Office Lock
Turn button locking. Turning button locks outside knob requiring use of key until button is manually unlocked. Inside knob always free.
X561
F84-1
Classroom Lock
Deadlocking latch bolt by knobs. Outside knob is locked by key in outside knob. Inside knob is always free.
X571
F90-1
Dormitory Lock
Deadlocking latch bolt by knobs except when locked by push button in inside knob. Key in outside knob locks or unlocks outside knob and releases button. Closing door releases push button. Inside knob always free.
X581
F86-1
Storeroom Lock
Deadlocking latch bolt by inside knob or key outside. Outside knob rigid.
X12
 ----
Dummy Trim
Single Trim–Surface mounted.

Trim Finishes Chart
The latest in modern techniques and equipment are used to apply the highest quality finish. Extra steps assure durable, consistent finishes and long useful life.

Although we apply the finest available protective plating and/ or clear powder coating to the surface of our products, these finishes have limitations and in time may deteriorate either from exposure to weather, pollution, perspiration, extremes of climate, frequency of use or other factors. Deterioration of these finishes is, therefore, not a defect, but a normal process which is unavoidable. Our company cannot accept responsibility for finish deterioration in these circumstances; therefore, the finishes cannot be guaranteed. These products will not be refinished or replaced under our warranty should deterioration of finishes occur.

Description
ANSI No.
Available on
Bright Brass
605
All Trim
Satin Brass
606
All Trim
Satin Bronze
612
All Trim
Satin Bronze Oil Rubbed
613
All Trim
Bright Chrome
625
All Trim
Satin Chrome
626
All Trim
Satin Stainless Stell
630
Troy Knobs Only

 
Sliding Door Pulls Template
 
 
Installation Instructions
H Series
Installation Instructions -(Note: The file will be 11x17 if printed.) WD-0D002(045)
   
M Series
Installation Instructions - Lock with trim one side 030255-000-70
Installation Instructions - Dummy - Single & Double 030254-000-70
Installation Instructions - Locks with sectional & escutcheon trim 030216-000-70A
   
MA Series
Installation Instructions Q513-067
   
T Series
Installation Instructions 030794-000-70
   
X Series
Installation Instructions 002290-000-70
   
D Series
Installation Instructions - Cylinder Deadbolt Q513-062
Installation Instructions - Thumbturn Deadbolt Q513-080
Installation Instructions - Thumbturn Deadbolt-Single Side Q513-084
   
RU Series
Installation Instructions 031534-000-70
   
B Series
Installation Instructions 031728-000-70
   
W Series
Installation Instructions - Lever Q513-048-A
Installation Instructions - Knob Q513-050-A
Installation Instructions - Dummy Q513-052-A
   
Y Series
Installation Instructions Q513-036
Installation Instructions - Dummy Trim Q513-037

Templates

DESCRIPTION DOOR TYPE TEMPLATE
All functions except Dummy Trim
RU101-RU881 1-3/4" latch height  (Wood) FRU100
RU101-RU881 1-3/4" latch height  (Metal) FRU101
RU101-RU881 2-1/16" latch height  (Wood) FRU102
RU101-RU881 2-5/8" latch height  (Wood) FRU103
RU101-RU881 2-11/16" latch height  (Wood) FRU104

STRIKES
DESCRIPTION STANDARD SERIES OPTIONAL SERIES DOOR TYPE TEMPLATE
Q330-151, Q001-049 Full lip, Square Corner    B, H, T, W, X, Y  Wood Jamb FJ100
Q330-151, Q001-049 Full lip, Square Corner    B, H, T, W, X, Y  Metal Jamb FJ101
Q330-150, Q001-048 Full lip, Round Corner, 1/4" radius    B, H, T, W, X, Y  Wood Jamb FJ102
Q330-150, Q001-048 Full lip, Round Corner, 1/4" radius    B, H, T, W, X, Y  Metal Jamb FJ103
10-095, 005051 Full lip, Square corner, deadbolt    D100, D200  Wood Jamb FJ104
10-095, 005051 Full lip, Square corner, deadbolt    D100, D200  Metal Jamb FJ105
10-092, 005051-001, Full lip, Round corner, 1/4" radius, deadbolt    D100, D200, H  Wood Jamb FJ106
10-092, 005051-001, Full lip, Round corner, 1/4" radius, deadbolt    D100, D200, H  Metal Jamb FJ107
010018-001, 10-094, Square corner, deadbolt  D100, D200, H    Wood Jamb FJ108
010018-001, 10-094, Square corner, deadbolt  D100, D200, H    Metal Jamb FJ109
030020, ASA, deadbolt    D100, D200  Wood Jamb FJ110
030020, ASA, deadbolt    D100, D200  Metal Jamb FJ111
10-064, Drive-in thimble    D100, D200  Wood Jamb FJ112
005164, A21315/6/7, Q330-148, Square corner, ANSI & Mortise  B, M, RU, T, W, X  D100, D200, H, Y  Wood Jamb FJ113
005164, A21315/6/7, Q330-148, Square corner, ANSI & Mortise  B, M, RU, T, W, X  D100, D200, H, Y  Metal Jamb FJ114
031471/2/3, 03-471 3-1/4" Single door special    RU  Wood Jamb FJ115
031477 Special with stop    RU  Wood Jamb FJ116
031474 4-13/16" Single door special    RU  Wood Jamb FJ117
Q001-046, Q330-149, 5183/5/6/7/8/9, 5075 T-Strike  H, Y  B, T, X, W  Wood Jamb FJ118
Q001-046, Q330-149, 5183/5/6/7/8/9, 5075 T-Strike  H, Y  B, T, X, W  Metal Jamb FJ119
30290 4 Hole security    D100, D200  Wood Jamb FJ120
10-103, 1" Round Corner, 1/4" radius, no box, Deadbolt    D100, D200  Wood Jamb FJ121
10-104, 1-1/4" Round Corner, 1/4" radius, 4 holes, no box Deadbolt    D100, D200  Wood Jamb FJ122
10-108, Round Corner, 1/4" radius, no box, Deadbolt    D100, D200  Wood Jamb FJ123
31448, Pair of doors, 4 holes, no box    RU  Wood Jamb FJ124
31449, Pair of doors, 2 holes, no box    RU  Wood Jamb FJ125
5183/5/6/7/8/9 - 4, T-Strike, Round Corner, 9/16" radius    T, X  Wood Jamb FJ126
 
Miscellaneous (Sliding Door Pulls)
C979 Cabinet Lock      (Wood) C979-0001
RU Series Installation Instructions       031534-000-70

Interchangeable Core (IC) Cylinders (Full Size and Small Format)
For use where fast rekeying by non-technical personnel is desired, conventional interchangeable cores offer a great blend of security and convenience. The special control key for the system is all you need to remove the old core and install a new one. The core itself can be rekeyed with standard Schlage pin kits. Unlike some other brands, Schlage interchangeable cores can always be integrated into existing systems with no adverse effect on the key system. IC locks are especially well-suited to chain stores and restaurants where frequent employee turnover requires immediate rekeying by store management. Use IC cylinders to save time and energy when changing labor-intensive locks on exit devices and other door hardware.

Interchangeable Cores
Description
For use in all X Series I/C keyed locks-6-pin (cover style)
For use in all X Series I/C keyed locks-7-pin (cover style)
For use in all X Series I/C keyed locks-6-pin (cap style)
For use in all X Series I/C keyed locks-7-pin (cap style)


Conventional Cylinders
Falcon's high quality conventional cylinders provide the standard level of security and functionality for Falcon locks. The exclusive use of solid brass bar stock plugs and shells, phosphor bronze springs, nickel silver keys and bottom pins, ensures long life and ease of operation.

Conventional Cylinders
Catalog Number
5-Pin Cylinder
6-Pin Cylinder
7-Pin Cylinder
Knob Design
Function
A23151-00
A23161-00
 ----
E, T
561
A23152-00
A23162-00
 ----
E, T
411/501/511/521/581
A23151-02
A23161-02
 ----
E, T
571
A23151-02
A23161-02 
A23171-01
H
561
A23152-02
A23162-02
A23172-02
H
411/501/511/521/581
A23151-03
A23161-03
A23171-02
H
571

Note: Specify finish: 606 or 626.
Specify keyway: “E”, “G” (standard), “H”, “K”, “L”, “N” or “P”.
 
Conventional Cylinders with Competitor Keyways - 6-Pin
Functions: 561
Description
Knob Design
Corbin/Russwin L4 ‘O’ Bitted
E, T
Corbin 60 ‘O’ Bitted
E, T
Corbin 60 ‘KD’ Keyed Different
E, T
Russwin D1 ‘O’ Bitted
E, T
Russwin D1 ‘KD’ Keyed Different
E, T
Sargent LA ‘O’ Bitted
E, T
Sargent LA ‘KD’ Keyed Different
E, T
Schlage C ‘O’ Bitted
E, T
Schlage C ‘KA’ Keyed Alike 4
E, T
Schlage C ‘KD’ Keyed Different
E, T
Schlage E ‘O’ Bitted
E, T
Yale 8 (PARA) ‘O’ Bitted
E, T
Yale 8 (PARA) ‘KD’ Keyed Different
E, T
Note: Specify finish: 606 or 626.

Functions: 571
Description
Knob Design
Corbin 60 O-bitted
H
Corbin 60 KD
H
Corbin Russwin L4 O-bitted
H
Russwin D1 O-bitted
H
Russwin D1 KD
H
Sargent LA O-bitted
H
Sargent LA KD
H
Schlage C O-bitted
H
Schlage C KA4
H
Schlage C KD
H
Schlage E O-bitted
H
Yale 8 Para O-bitted
H
Yale 8 Para KD
H

Note: Specify finish: 606 or 626.

Functions: 411, 501, 511, 521 and 581
Description
Knob Design
Corbin/Russwin L4 ‘O’ Bitted
E,T
Corbin 60 ‘O’ Bitted
E,T
Corbin 60 ‘KD’ Keyed Different
E,T
Russwin D1 ‘O’ Bitted
E,T
Russwin D1 ‘KD’ Keyed Different
E,T
Sargent LA ‘O’ Bitted
E,T
Sargent LA ‘KD’ Keyed Different
E,T
Schlage C ‘O’ Bitted
E,T
Schlage C ‘KA’ Keyed Alike 4
E,T
Schlage C ‘KD’ Keyed Different
E,T
Schlage E ‘O’ Bitted
E,T
Yale 8 (PARA) ‘O’ Bitted
E,T
Yale 8 (PARA) ‘KD’ Keyed Different
E,T
Corbin/Russwin L4 ‘O’ Bitted
H
Corbin 60 ‘O’ Bitted
H
Corbin 60 ‘KD’ Keyed Different
H
Russwin D1 ‘O’ Bitted
H
Russwin D1 ‘KD’ Keyed Different
H
Sargent LA ‘O’ Bitted
H
Sargent LA ‘KD’ Keyed Different
H
Schlage C ‘O’ Bitted
H
Schlage C ‘KA’ Keyed Alike 4
H
Schlage C ‘KD’ Keyed Different
H
Schlage E ‘O’ Bitted
H
Yale 8 (PARA) ‘O’ Bitted
H
Yale 8 (PARA) ‘KD’ Keyed Different
H

Note: Specify finish: 606 or 626.
 
Functions: 561 Hana an dX571 Troy & Elite
Description
Knob Design
Corbin/Russwin L4 ‘O’ Bitted
E,T,H
Corbin 60 ‘O’ Bitted
E,T,H
Corbin 60 ‘KD’ Keyed Different
E,T,H
Russwin D1 ‘O’ Bitted
E,T,H
Russwin D1 ‘KD’ Keyed Different
E,T,H
Sargent LA ‘O’ Bitted
E,T,H
Sargent LA ‘KD’ Keyed Different
E,T,H
Schlage C ‘O’ Bitted
E,T,H
Schlage C ‘KA’ Keyed Alike 4
E,T,H
Schlage C ‘KD’ Keyed Different
E,T,H
Schlage E ‘O’ Bitted
E,T,H
Yale 8 (PARA) ‘O’ Bitted
E,T,H
Yale 8 (PARA) ‘KD’ Keyed Different
E,T,H
 Note: Specify finish: 606 or 626.
Standard cylinders with competitor keyways - 7-Pin
 
Construction Keying
Falcon offers two different construction key systems depending on the size of and application within the project. Both systems permit the installation and use of regular door locks during construction, yet completely preserve the security of the keying system for the ultimate building owner. The Master, Grand Master and change keys are never with the locks during the construction phase of a building. Only the “construction” keys are sent to the job site. Where the job permits, we will utilize the “Lost Pin System” as our standard system for construction keying. Larger or more complicated jobs may require the use of our “Blockokey® System” for construction keying.

“Disposable Construction” Interchangeable Cores
This newly designed disposable construction core (1408) is an inexpensive alternative to interior keyed construction cores. This core should be used on interior door applications or where security on a site is not a concern. No keys need to be issued. The disposable core is inserted in the lever or knob and is operated by a thumb turn, which retracts the latch bolt. Please use either brass or permanent construction cores on exterior doors or secured areas.

Locks with ”Lost Pin System”
Our “lost” pin construction key system consists of one construction pin and a shallow hole in the side of the plug.

Construction Key—KB566
When the “construction” key is used, the construction pin is always in the cylinder plug, sitting on top of the bottom pin. consists of one construction pin and a shallow hole in the side of the plug.

Master Key—KB578
When the Master key is inserted, the construction pin is pushed up into the cylinder housing. As the Master key is rotated to the right, the construction pin will drop into the hole in the plug, thereby eliminating any future use of the construction key.

Locks with Blockokey® Cylinders
All lock cylinders on a specific project are operable by a special “project key.” Duplicates of this key may be assigned by the building contractor to workmen and subcontractors as required. No regular change keys or Master keys are needed on the job. This eliminates the possibility of subsequent exposure from lost or stolen keys.

How Locks with Blockokey® Cylinders are Used
Project Key—KB531
Lock cylinder is operated by the special ”project key.” The last two pins in the cylinder are held inoperative by the key block.

Removal Tool—KB536
The special ”project key” is canceled out by removal of the key block. A key block removal tool is furnished with the Master keys for the locks. Simply push the removal tool into the keyway, then withdraw it to remove the block. Thereafter, the ”project key” will no longer operate the lock cylinder.

Change or Master Key—KB578
Cylinder is now only operable by the regular change key or Master key.
 
X Series Grade 1 Cylindrical Key-In-Knob Lock
ANSI No.
Function
Falcon
Arrow
Best
Corbin/
Russwin
Marks
Sargent
Yale
F75-1  
Passage
X101
H01
83KN
CK4210
80N
8U15
5401
F76-1  
Privacy
X301
H02
83KL
CK4220
80L
8U65
5402
F87-1   
Asylum
X411
H33
83KW
CK4232
80DW
8G17
5430
F82-1    
Entry
X501
H13
83KAB
CK4261
 ----
8G24
5407
F109-1   
Entry/Office
X511
H11
83KAB
CK4251
80AB
8G24
5407
F81-1 
Office
X521
H11
83KAB
CK4251
80A
8G05
5407
F84-1  
Classroom
X561
H17
83KR
CK 4255
80S
8G37
5408
F90-1  
Dormitory
X571
H19
83KT
CK4275
80T
8G54
5422
F86-1  
Storeroom
X581
H12
83KD
CK4257
80F
8G04
5405
 ----
Dummy–Single
X12
H08
83K1DT
CK4250
80DO
8U93
455
     
Trim Styles
Falcon
Arrow
Best
Corbin/
Russwin
Marks
Sargent
Yale
Hana/Gala (HG)
BD
4C
GRC
280
OB
CA
Troy/Gala (TG)
TA
 ----
 ----
180
EC
LF
Elite/Gala (EG)
DD
6C
BRC
 ----
EG
BR
Latches - Grade 1, UL Listed
Description
Faceplate Size
Corner
Projection
2-3/4” Backset Spring
2-1/4” x 1-1/8”
Square
9/16”
2-3/4” Backset Deadlocking
2-1/4” x 1-1/8”
Square
9/16”
2-3/4” Backset Spring
2-1/4” x 1-1/8”
Radius 9/16”
9/16”
2-3/4” Backset Deadlocking
2-1/4” x 1-1/8”
Radius 9/16”
9/16”
2-3/4” Backset Deadlocking 
2-1/4” x 1-1/8”
Square
3/4”
2-3/4” Backset Deadlocking
2-1/4” x 1-1/8” 
Radius 9/16”
3/4”
Note: Specify finish 606, 612, 613, 630
 
Latches - Grade 2, UL Listed for Flat or Beveled Doors
Latches for X Series locks are UL Listed.
These grade 2 latches have self-adjusting fronts to accommodate beveled or flat front doors.
Unless otherwise specified, we furnish a 2-1/4” x 1” x square corner faceplate on these latches.
 
Description
Faceplate Size
Corner
Projection
3/8” Backset Spring
2-1/4” x 1”
Square
1/2”
3/8” Backset Deadlocking
2-1/4” x 1”
Square
1/2”
2-3/8” Backset Spring
2-1/4” x 1”
Radius
1/2”
3/8” Backset Deadlocking
2-1/4” x 1”
Radius
1/2”
2-3/4” Backset Spring
2-1/4” x 1”
Square
1/2”
3/4” Backset Deadlocking
2-1/4” x 1”
Square
1/2”
2-3/4” Backset Spring
2-1/4” x 1”
Radius
1/2”
2-3/4” Backset Deadlocking
2-1/4” x 1”
Radius
1/2”
Note: Specify finish 606, 612, 613, 630
 
Strikes
Furnished with a 4 7/8” ANSI Strike unless otherwise specified.
Description
ANSI Prep A115.2
T-Strike Square Corner
Vermin Proof Strike for Ships
Full Lip, Square Corner
Full Lip, 1/4" Radius Corner
 
Long Backset Extension Link
A22161-005-00 Link for 5” Backset for use with 2-3/4” backset latches (except 3/4” projection).
 
Dust Boxes
005099-000-30
1” deep. May be used with any 4-7/8” high (ANSI) strike.
012191-003-70
1/2” deep. May be used with any 2-3/4” high (T) strike.