We are excited to introduce Schlage Mobile Access Solutions, the most secure and flexible access control solution available in the industry today. At the center, is the new Schlage Mobile Access Credential which provides users the convenience and security of using a smart device to unlock openings.
Schlage Mobile Access Credentials are designed to work with the following devices:
To learn more about Schlage Mobile Access Solutions, please connect with your local Allegion Sales Consultant or CONTACT US.
There are three ways to identify if you have mobile enabled hardware that is designed to work with Schlage Mobile Access Credentials:
If your device was purchased after the release dates listed above, then you might have mobile enabled hardware.
Check either the ENGAGE™ App or the Hardware Identity to verify.
We recommend using the ENGAGE™ web app. Navigate to the Device tab, select a device and look for the “B” in the model number.
The ENGAGE™ mobile app can also be used. Navigate to Devices, select a device, press More, press Settings and look for the “B” in the model number.
Model numbers listed as BE467B, FE410B, LEBMS, LEBMD, LEBMB, NDEB, MTB11, MTB15, MTKB15 are mobile enabled.
Schlage Control™ - check for a small white dot under the thumbturn on the exterior cover.
Schlage MTB Readers – check the reader cover for the Bluetooth symbol located to the right of the Schlage logo.
Schlage NDEB – check for interior push button on interior escutcheon.
Schlage LEB – check for a white PCB (main circuit board) by removing battery cover.
Retrofit kits are available to upgrade existing Schlage Control™, NDE and LE wireless locks, transforming them to be compatible with Schlage Mobile Access Credentials as follows:
Schlage MT multi-technology readers are not eligible to be upgraded. A new Schlage MTB mobile enabled multi-technology reader will need to be installed to be compatible with Schlage Mobile Access Credentials.